Iniectio auro apparatus structuram et function

In structuram et functioniniectio auro apparatusCum infusum est ratio est de composito, quod clamping systema, ratio transmissionis hydrau, potestatem in electrica ratio, lubricatae ratio est, calefaciendi et refrigerandum ratio, etiniectio auro apparatusmagna ratio.
1. ratio Iniectio
One of the main components of the iniectio auro apparatus is the main camera system. Plunger type, screw type and screw pre-plasticized plunger type are usually three types of injection systems. The screw type is widely used. The injection system is composed of a plasticizing device and a power transmission device. Injection cylinder, injection seat moving cylinder and screw

2. Imperium Electrical
Electrica adjumenta Electronic componentia metra calentium, sensoriis etc. electrica simul imperio et potestate fere quatuor modis manuali dui semi- plene automatic et temperatio. Servatis processus (pressura, temperatus: celeritas, tempus) et ex variis actibus progressioiniectio apparatusex hoc intellegi potest quod per matching electrica imperium ratio recte et HYDRAULICUS system.

3. calefacere / Refrigerant

Heating the barrel and the injection nozzle is the main purpose of the heating system. The heating device of the barrel of the iniectio auro apparatus usually uses an electric heating coil, which is installed externally, and uses an electric thermocouple to detect in sections. The heat source of material plasticization is provided by the heat conduction of the cylinder wall. Excessive oil temperature will cause multiple failures. Therefore, it is the main purpose of controlling the oil temperature and cooling the oil temperature. Near the feeding port of the feed pipe is another place that needs to be cooled to avoid melting of the raw materials at the feeding port, which will cause the raw materials to fail to be fed normally.

4. lubricatae ratio
A loop gastric lubrication system that provides lubrication conditions at the relative moving parts of the iniectio auro apparatus's movable template, mold adjusting device, connecting rod hinge, injection platform, etc., so that energy consumption is reduced and the life of parts is increased, whether it is automatic electric Or regular manual lubrication is acceptable.

5. Iniectio CUMATIUM ApparatusCras

Quod usus praesidio fabrica fabrica et principalis est de machinisiniectio auro apparatus. Doors, baffles, hydraulic valves, limit switches, and photoelectric detection components are the main components, enabling the realization of the electric-mechanical-hydraulic interlocking protection. The oil temperature, material temperature, system overload of the iniectio auro apparatus, as well as process and equipment failures are detected, and the main function of the system to indicate abnormal conditions or alarm is not detected.