Working iniectio auro apparatus a principle

Iniectio CUMATIUM Apparatusis quoque dicitur iniectio apparatus, quod est pelagus alteram coronam aureolam per plastic apparatu utitur, ut ad formas in materia plastica thermosetting thermoplastic et varias cohibere figuras a plastic products. Inter verticali ad horizontalem, mobilem efficiamus, et electrica. Quod cum plastic iniectio auro apparatus et mederi potest adhibere summus pressura conflatili plastic arque ad replete cavum fingunt.

Et quia iniectio iniectio auro apparatus usus clysterem eluere, et habent inter se similes working principle. Is processus est quod conflavit plasticized status (id est, lentaque inueniri statum fluxus), infusum est in plastic clausa fingunt cavum, a telo cochlea (vel plunger), et postquam adeptus est productum ex concretione et rudimentum nancisci.

Primo, adde puluerem vel granulis in plastic cadus estiniectio auro apparatus. Quod sit soluta plastic gyrationisf the screw and the outer wall of the barrel. Then the machine closes the mold and moves the injection seat forward, and the nozzle is close to the gate of the mold. , And then pass the pressure oil through the injection cylinder and push the screw forward. Thus, the molten material is injected into the closed mold with a lower temperature at a high pressure and a faster speed. After a certain period of time and pressure holding (also called pressure holding), cooling, solidification and molding, the product can be opened and the product can be taken out. (To ensure that the product has a certain density and dimensional tolerances, it is the purpose of maintaining pressure to supplement the material in the cavity to avoid the reflux of the melt in the cavity). Plasticization, injection and molding are the basic requirements of injection molding. The prerequisite for the quality of the formed product to be achieved and guaranteed is plasticization, and there is a high pressure response in the cavity (20-45MPa is usually the average pressure in the cavity), so the iniectio auro apparatus has enough Large clamping force. It can be seen that the injection device and clamping device of the key part of the iniectio auro apparatus.